Floor Preparation:
Using BLAST OFF NO-Rinse, No-Scrub Liquifying Stripper, strip off old finish and wax, paying particular attention to areas under furniture, and build-up areas. For baseboards and corners, use TAKE OFF Soil & Finish Build Up Remover Baseboard Stripper. R
Application:
Using a clean mop or applicator apply a thin uniform coat of MIRROR BASE. Allow to dry for a minimum of 30 minutes after each coat. Do not apply more than 5 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.
High Speed Buffing & Burnishing:
This is an ideal product for use with high speed polishing or burnishing machines of 175 to 2000 RPM. Allow 24 hours after finishing floor before attempting to burnish. Prior to high speed buffing or burnishing the floor surface should be dust mopped us
Maintenance:
Maintain by dust m mopping daily using mop treated with DUST UP dust mop treatment. Damp mop or clean with an automatic scrubber as required, using ENERGIZER neutral floor cleaner at the specified dilution. Spray buffing to remove embedded soils is reco